manualshive.com logo in svg

Intermec EasyCoder E4, Руководство программиста, Страница: 47 / 122

Поделиться
Скачать
Intermec EasyCoder E4 Скачать руководство пользователя страница 47

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

 

45

 

Chapter 5

     Feeding and Printing Commands

3. Batch Printing

General Information

The term “Batch Printing” means the process of printing several 
labels. The labels may either be exact copies or different from 
each other.

For batch printing, the most critical factor is the time required to 
process the print image into a bitmap and store it in the image 
buffer. The image buffer compensates for differences between 
processing time and printing time. If the bitmap is too large to 
be stored in its entirety in the image buffer, it will be divided into 
a number of segments across the media feed direction which will 
be processed one after the other and downloaded to the image 
buffer. As the buffer is emptied by printing, a new segment can 
be processed and downloaded.

When printing a batch of labels from a predefi ned layout, the 
layout is processed before each new copy is printed, in order 
to allow counter, date, and time values to be updated. When 
a layout is not used, all copies will contain exactly the same 
information. 

When using batch printing, take the following into consider-
ation:
•   Using command abbreviations. For example, 

PF

 instead of 

PRINTFEED

 improves the performance.

•   The more processing a label requires, the slower it will be 

printed.

•   In case of small differences between labels, make use of 

CLL

 

and 

FIELDNO

 commands (see later in this chapter) and edit 

the layout so that variable data are processed last.

•   If you are printing scaled TrueType fonts and the printer is 

working very slowly, use the 

PRESCALE

 command to create 

bitmapped versions of the scaled fonts for quicker access (see 
Chapter 9.3).

•   Switching verbosity off using 

SYSVAR(18)

 may improve 

printing speed (see Chapter 6.13).

If you have any problems, for example the printer stops between 
labels,  lower the print speed, or make the print image easier 
to process. 

You can interrupt batch printing by issuing a 

BREAK

 command 

as described in Chapter 6.16.

Содержание EasyCoder E4



























































































































Отзывы:

Нет отзывов