Intermec EasyCoder E4, Руководство программиста, Страница: 115 / 122

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual 113
Chapter 13 Commands and Functions
Instruction Chapter Purpose
INPUT OFF 6.1 Restores SYSVAR(18) and disables layouts and use of variable
data fi elds.
INVIMAGE (II) 4.3, 4.5 Inverts the printing of text and images from “black-on-white”
to “white-on-black”.
KILL 8.2 Deletes a fi le from the printer’s RAM memory or from a DOS-
formatted memory card.
LAYOUT END 4.8 Stops the recording of a layout description and saves the
layout.
LAYOUT INPUT 4.8 Starts the recording of a layout description.
LAYOUT RUN 4.9 Enables a pre-defi ned layout.
LTS& ON/OFF 6.7 Enables or disables the label taken sensor.
MAG 4.3, 4.5 Magnifi es a font, barfont or image up to four times separately
with regard to height and width.
MAP 6.10 Changes the ASCII value of a character when received on
the standard IN channel, or optionally on another specifi ed
communication channel.
NAME DATE$ 6.4 Enters the preferred month name in return strings of
DATE$("F") and DATEADD$(...,"F").
NAME WEEKDAY$ 6.4 Enters the preferred weekday name in return strings of
WEEKDAY$.
NASC 6.11, 9.2 Selects a national single-byte character set.
NASCD 9.2 Selects a mapping method for large character set fonts.
NORIMAGE (NI) 4.3, 4.5 Returns to normal printing after an INVIMAGE statement
has been issued.
PRBAR (PB) 4.9 Prints a bar code.
PRBOX (PX) 4.6 Prints a box.
PRESCALE (PS) 9.3 Scales the characters listed in the accompanying text string
using the current font settings.
PRIMAGE (PM) 4.5, 4.9 Prints an image stored in the printer’s memory.
PRINT (?) 7.1 Prints data to the standard OUT channel.
PRINT KEY ON 6.8 Enables printing of the current label when the <Feed> button
is pressed.
1. Commands, cont.