manualshive.com logo in svg

Intermec EasyCoder E4, Руководство программиста, Страница: 112 / 122

Поделиться
Скачать
Intermec EasyCoder E4 Скачать руководство пользователя страница 112

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

110

 Chapter 13

1. Commands

Commands and Functions

Instruction Chapter 

Purpose

ALIGN (AN) 

4.2 

Specifi es which part of a text, bar code fi eld, image fi eld, line, 
or box will be positioned at the insertion point.

BARFONT (BF)  

4.4 

Specifi es a single-byte character set font for printing human 
readable bar code interpretation. The settings are: start 
parameter; font name; font size in points; character slant 
in degrees, with positive values slanting the characters to 
the right; vertical offset between the bar code and the 
interpretation; width magnifi cation; height magnifi cation; 
enable/disable the printing of bar code interpretations.

BARFONT (BF) ON/OFF   4.4 

Enables/disables the printing of bar code interpretations.

BARFONTD (BFD) 

9.2 

Specifi es a double-byte character set font for printing human 
readable bar code interpretation. The settings are: font name; 
font size in points; character slant in degrees.

BARFONTDSIZE (BFSD) 

9.2 

Specifi es the font size of a double-byte character set in points 
for printing human readable bar code interpretation.

BARFONTDSLANT (BFLD) 9.2 

Specifi es the slant of a double-byte character set font in degrees 
for printing human readable bar code interpretation.

BARFONTSIZE (BFS) 

9.2 

Specifi es the font size for a single-byte character set font in 
points for printing human readable bar code interpretation.

BARFONTSLANT (BFL) 

9.2 

Specifi es the slant of a single-byte character set font in degrees 
for printing human readable bar code interpretation.

BARHEIGHT (BH)  

4.4 

Specifi es the height of a bar code in dots.

BARMAG (BM)  

4.4 

Specifi es the magnifi cation with regard to the width of the bars 
in a bar code.

BARRATIO (BR)  

4.4 

Specifi es the width ratio between wide and narrow bars in a 
bar code.

BARSET 4.4, 

9.1 

Specifi es a bar code type and sets parameters for complex bar 
codes.

BARTYPE (BT) 

4.4 

Specifi es the type of bar code.

BREAK 6.16 

Specifi es a break interrupt character separately for the parallel 
and serial communication channels.

Содержание EasyCoder E4



























































































































Отзывы:

Нет отзывов