Intermec CN4, Руководство пользователя, Страница: 79 / 146

Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 67
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63
characters. After you enter a passphrase, the CN4 internally
converts it to a pre-shared key.
This value must match the passphrase on the authenticator.
7 Save your settings.
Configuring 802.1x Security with Microsoft Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security .
4 For Infrastructure Mode , choose Infrastructure .
5 For Network Authentication , choose Open .
6 For Data Encryption , choose WEP .
7 For 802.1X Authentication , choose TLS or PEAP .
8 If you choose TLS:
a Choose Properties > Run App . The Auth. Settings box
appears.
b Choose Select .
c Select your certificate from the list and press Enter . The User
Logon dialog box appears.
d Enter a User Name and a Domain .
If you choose PEAP:
a Choose Properties > Run App . The Auth. Settings box
appears.
b Select Validate Server and press Enter . When the radio starts
to authenticate, the Network Password dialog box appears.
c Enter a User Name and Password and select Save Password .
d (Optional) In the Domain field, enter the domain.
e Press Enter .