Intermec CN4, Руководство пользователя

Страница: 40 / 146

Chapter 1 — Using the CN4
28 CN4 Mobile Computer User’s Manual
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on the computer. Use
Intermec Settings to enable and disable symbologies. For help, see
“Configuring the CN4 Parameters” on page 48.
Improving Imager Performance
If you experience problems reading bar codes, try some of these tips to
improve the imager performance.
• Keep your hand as steady as possible while scanning a label.
• Position the imager as close to the bar code as possible while still
being able to capture the entire bar code.
• Enable only the bar code symbologies that you need to use every
day.
You can also choose a predefined mode that optimizes imager settings
for different needs or environments.
To choose a predefined mode for the imager
1 Start Intermec Settings. For help, see “Configuring the CN4
Parameters” on page 48.
2 Tap Data Collection > Internal Scanner > Imager Settings >
General and then choose an option from the Predefined Modes
list::
3 Save your settings.
Predefined Mode Select If You Are Scanning:
1D Only 1D labels.
1D and 2D Standard (Default) All types of bar code labels.
1D and 2D Bright
Environment In high ambient light, such as outdoors in the
sunshine.
1D and 2D
Reflective Surface Glossy labels.
Custom In conditions that require customized settings.
For complete information about these settings,
commands, and parameters, see the
Intermec Settings Command Reference Manual .