Intermec CK3a, Руководство пользователя

Страница: 50 / 126

Chapter 2 — Connecting and Configuring the CK3
40 CK3 Mobile Computer User’s Manual
Configuring Wireless Security
The CK3 provides four types of security for your wireless network:
• Wi-Fi Protected Access (WPA)
• Wi-Fi Protected Access 2 (WPA2™)
• 802.1x
• WEP
This section explains how to configure wireless security on your CK3.
If you choose not to use security, see
“Disabling Security” on
page 51 . Intermec always recommends that you implement security.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section,
“Choosing
Between Funk and Microsoft Security.”
TX Power Transmit power level in milliwatts (mW).
RSSI The Received Signal Strength Indicator. The closer to zero,
the better for this indicator.
Link The data rate at which the radios are communicating.
Scan Use this tab to scan your network and get information about access points your
CK3 can communicate with.
Supp Use the Supplicant tab to view information about security and authentication
settings on your CK3.
Configure
Profile Launches the Profile Wizard and configures 802.11 options.
Reconnect Disassociates then reassociates and reauthenticates the radio.
Clear Events Removes information from the Supplicant Event box.
Ping Use this tab to contact and retrieve information from any host in your network.
RSSI Displays the RSSI history for a configurable sample period.
Conf Use this tab to enable RSSI logging, choose a file name, set a sample period, and
choose the number of samples to display.
Understanding the ISpyWiFi Tabs (continued)
Tab Description