background image

Preface

6    PEN*KEY

R

 6200/6300 Hand-Held Computer Programmer’s Reference Guide

Support Available

As you pursue your PEN*KEY 6000 Series computer development activity, you

can obtain information and personal assistance from various resources.
This Programmer's Reference Guide pulls together, under one cover, many diĆ

verse and separate topics related to PEN*KEY 6000 Series development activity.

"

NOTE:

Other related information is available from third-party suppliers.  Many of these sources are
identified in Section 8.

Factory Service

If your unit is faulty, you can ship it to the nearest authorized Service Center for

factoryĆquality service.

Customer Support Center

The Intermec Customer Support Center (technical support) telephone number is

800Ć755Ć5505 (U.S.A. or Canada) or 425Ć356Ć1799.  The facsimile number is

425Ć356Ć1688. Email is 

[email protected]

.

If you email or fax a problem or question include the following information in

your message:  your name, your company name and address, phone number and

email to respond to, and problem description or question (the more specific, the

better).  If the equipment was purchased through a ValueĆAdded Reseller please

include that information.

Web Site

The Customer Support File Libraries, including Hot Tips and Product Awareness

Bulletins, are available via the Intermec Product Support page at this URL: 

http://norbbs.norand.com/index.htm

.  New users can sign up for a new account

on this page.
PDF versions of Intermec manuals can be found at this URL:  

http://corp.intermec.com/manuals/english.htm.

Bulletin Board Service

The Customer Support Bulletin Board (BBS), maintained by Intermec TechnoloĆ

gies Corporation, provides software and documentation:

"

Phone number:

  319Ć369Ć3515 (14.4 Kbps modem)

319Ć369Ć3516 (28.8 Kbps modem)

"

Protocol:

 Full duplex, ANSI or ANSIĆBBS; 300 to 28,800 bps; v.32bis; 8

bits, no parity, 1 stop bit.  

For highĆspeed modems, disable XON/XOFF and

enable RTS/CTS.

This is the same location available via the web site.  If your web access uses

highĆspeed phone lines, the web interface provides a faster response.

Preface

Содержание 6300 SERIES



























































































































































































































































































































































































































Отзывы: