Intermec 1022AD01B, Руководство пользователя, Страница: 21 / 59

Chapter 2 — Connect the SD62 System
12 SD62 Base Station User’s Guide
Connect an Intermec Scanner to the SD62
You can connect up to seven Intermec Bluetooth scanners to the
SD62 Base Station.
To connect up to 7 scanners
1 Connect the SD62 base station to a host device using the correct
cable for your interface (see
“Connect the SD62 to a Host
Device” on page 8 ).
2 With each scanner you want to connect, scan the Bluetooth
System Connect bar code label on the SD62 base station and wait
for the connection to be established.
The scanner beeps twice, the green status light flashes twice and
the blue Intermec Ready-to-Work indicator starts blinking (may
blink for a few seconds). When the scanner connects to the base
station it emits a series of beeps from low to high. The blue
Intermec Ready-to-Work indicator turns on and stays on for both
the scanner and base station.
IMPORTANT
If you are connecting one of the following products to your SD62
Base Station (or a mix of new and legacy scanners), you will need to
use the
Bluetooth Quick Connect bar code label that is provided in
the SD62 box. The following products are not compatible with the
Bluetooth System Connect bar code located on the top of your
SD62 base station:
• SF51 Cordless Scanner (all models)
• SR61B Cordless Scanner (legacy models only, see the following
part numbers)