ET700 SERIES EASY-SET BASIC PROGRAMMING
RESET TIME SWITCH:
1. Set rotary dial in the
AUTO
position.
2. Press the
RESET
switch for 3-5 seconds to reset the
microprocessor memory and clear all programmed information.
The display should now show day 1 and 10:00 AM.
NOTE
: Do not press the RESET switch after programming has begun
or you will loose all of your programmed information.
TO SET PRESENT TIME AND DAY OF WEEK:
1. Place the rotary dial in the
SET
position.
2. Press the touch pad for the present day of week.
3. Press the hour and minute for the current time of day.
4. Press
AM
or
PM
button.
5. Press
CLOCK
button.
6. To verify that the correct time and day is set, set rotary dial to
the
AUTO
position and current time and day should be
displayed.
NOTE:
If the current time and day are incorrect, repeat steps 2-6.
TO PROGRAM TIMES:
1. Place the rotary dial in the
SET
position.
2. Press the touch pad button for the first day to be programmed.
3. Press the hour, minute,
AM
or
PM
for the first on time.
4. Press the
ON
button.
5. Press the hour, minute,
AM
or
PM
for the first off time.
6. Press the
OFF
button.
7. Continue to program each day of the week repeating steps 2-6.
8. When finished set the rotary dial to the
AUTO
position.
NOTE:
If you wish to copy a days on and off times to another day
after step 6 make sure the rotary dial in turned to the
SET
position,
press the touch pad for the day copied
to
eg. (Monday day 2) press
2, press the
ON
button, then press the touch pad for the day copied
from
eg. (Sunday day 1) press 1, so press 2
ON
1, 3
ON
1, 4
ON
1
etc.
