© 2017 United Technologies Corporation 1 / 2
466-
5270 • REV C • ISS 14FEB17
UltraSync Modular Hub
Zone Expansion Module
Installation Sheet
UM-Z8
UM-Z20
English Installation Sheet
Product Summary:
These modules add 8 or 20 hardwired zone inputs to an UltraSync Modular Hub system.
Installation
1. Pull down the din rail tab on the bottom of the module.
2. Hang the module on the top of the din rail, tilting the bottom of
the module outward. Once the module is vertical, lock the
module on the rail by pushing the tab up.
4. Install a TERM (bus termination) jumper if required.
See above for guidance.
5. Enroll the expansion module in your system. To manually
enroll the module, use the web interface. In the advanced
menu, navigate to
Devices
–
System Devices
–
Control
–
Enroll
Function
and select
Manual Enroll
from the
drop down menu. This puts the system into manual
enrollment mode.
6. When the CPU is in the manual enrollment mode, simply
push ENROLL button on the module to enroll the module
into the system. Hold the button down for three seconds.
You can automatically enroll the module into the system
by pressing the ENROLL button on the CPU.
1. Tamper input.
Disabled by default. Connect tamper
switch when mounted in a separate
enclosure from CPU. Enable in
\Devices\System Devices\Relay
Expanders\Expander Options.
2. Manual enroll button
3. TERM (bus termination). Correct RS-
485 termination reduces communication
issues with signal reflections. For a
single long cable run, put a jumper
across the terminal labeled TERM on
the CPU and the furthest bus device.
For installations with multiple long cable
runs, (star configurations) do not place a
terminator on the CPU; rather place one
at the end of the
two longest
cable
runs.
4. Power available on terminals for sensors.
UM-Z20
(pictured)
or
UM-Z8
3
1
2
4
3. Connect the POS, NEG, LAN+ and LAN-
UM-Z8
TM
PLEASE READ THE ULTRASYNC MODULAR HUB REFERENCE GUIDE BEFORE
USING THIS PRODUCT WHICH INCLUDES IMPORTANT SAFETY AND LEGAL
INFORMATION INCLUDING WARNINGS, WARRANTY DISCLAIMERS, AND
LIMITATIONS OF LIABILITY, AND COMPLETE INSTRUCTIONS ON HOW TO ENROLL
AND CONFIGURE EXPANSION MODULES. THE REFERENCE GUIDE IS AVAILABLE
AT: http://www.interlogix.com/intrusion/product/ultrasync-modular-hub
S'IL VOUS PLAÎT LIRE LE GUIDE DE REFERENCE POUR LE HUB UltraSync
MODULAIRE AVANT D'UTILISER CE PRODUIT QUI COMPREND LA SÉCURITÉ
IMPORTANT ET JURIDIQUES INFORMATIONS, Y COMPRIS LES AVERTISSEMENTS,
GARANTIE EXCLUSIONS, ET LIMITATIONS DE RESPONSABILITÉ ET INSTRUCTIONS
COMPLETES SUR COMMENT ENROLLER ET CONFIGURER LES MODULES
D’EXPANSION. LE GUIDE DE RÉFÉRENCE
EST DISPONIBLE AU: http://www.interlogix.com/intrusion/product/ultrasync-modular-hub.
