
© 2018 United Technologies Corporation. All rights reserved.
P/N 1073438-EN
• REV
B
• ISS
15MAY18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
TVP
-CWM
Compact PTZ Indoor Wall Mount
Installation Instructions
Dimensions
Dimensions
:
125.8 × 80 × 223.9 mm (4.95 × 3.15 ×
8.81 in.)
Weight:
450 g (0.99 lbs.)
Accessories
:
Drill template: 1 pcs
Used to drill
mounting
holes.
Drywall anchor
s: 4 pcs
Used to install the
indoor wall mount
to the
mounting surface
.
Screw A: 4 pcs
Used to install the
indoor wall mount to the mounting surface
.
Screw B:
3 pcs
Used
to install the mounting plate to the indoor wall mount.
Supported cameras
The compact PTZ indoor plastic
wall mount can be used with
following cameras:
IP Compact
PTZ Camera:
TVP
-5101
Installation
To install the TVP-5101 PTZ camera on a mounting surface
using the TVP-CWM:
1.
Remove the wall mount mounting plate from the
mount by
loosening the screw that locks the mount in place, located
towards the back of the wall mount. Pull the mounting
plate away from the mount. It is held in place by two
metal
clips and dimples.
2.
Rotate the
adapter
plate counterclockwise to separate it
from the PTZ camera.
Open
View of adapter plate when
mounted to the PTZ
View of the adapter plate that
goes towards the PTZ
3. Keep in mind that the PTZ pan range is 350 degrees.
Align the cable access hole in the adapter
plate with
the
access hole
in the wall mount. Install the
adapter plate to
the wall mount using screw B
.