NS4702
-
24P
-
4X Quick Installation Guide
Figure 1: NS4702-24P-4X L2+ Gigabit PoE Managed Switch with
LCD
Package contents
Thank you for purchasing
the
NS4702
-
24P
-
4X
IFS
L2+
24
-port
Gigabit PoE +4
-
Port 10G SFP+ Managed Switch with LCD
.
The descriptions
of th
is model are as
follows
:
L2+ 2
4
-port
802.3af/at
+ 4
-Port
10G
SFP
+
Managed Switch
with LCD
Unless specified, t
he term “
managed switch
” mentioned in this
quick installation guide
refers to the
NS4702
-
24P
-
4X
.
Open the box of the managed switch
and carefully unpack it.
The box should contain the following items:
The
managed swi
tch × 1
Quick installation gu
ide × 1
CD with user manual × 1
RJ45 to RS232
ca
ble x 1
Rubber feet x 4
Two rack
-
mounting brackets with attachment screws x 1
Power cord x 1
SFP dust
-
proof cap x 4
If any of these are
missing or damaged,
contact your dealer
immediately. If possible,
retain the carton including the original
packing materials for
repack
ing
the product in case there is a
need to return it to us for repair.
Requirements
The managed
switch
provide
s a
remote login
interface for
manage
ment purposes. The following equipment is necessary
for further management:
Workstations running Windows
®
XP
/ 2003 /
Vista
/ 7 / 8 /
2008 / 10
, MAC OS
X
or later, Linux, UNIX
, or other
platform
s are
compatible with TCP/IP protocols.
Workstation
s are i
nstalled with Ethernet NIC (Network
Interface Card)
Serial port connection (Terminal)
The a
bove workstation
s come
with
a
COM Port
(DB9)
or USB
-to-
RS
232 converter.
The a
bove workstation
s ha
ve been
installed
with a
terminal emulator, such as
Hyper Terminal included in
Windows XP/2003
.
Serial cable
– One end is attached
to the RS
232
serial port, and the other end is attached to the
c
onsole port of the managed switch.
Ethernet port connection
Network cables
– U
se standard network (UTP) cables
with RJ45 connectors.
The above
workstations
have a
Web browser
and
JAVA runtime environment plug
-in installed.
Note
: We recom
mend us
ing
Internet Explore
r 8.0 or later to
access the managed
switch
.
If the web interface of the
managed switch is not
accessible, turn off the anti
-
virus
software or firewall
and
then try
it again.
Terminal setup
To configure the system, connect a serial cable to a COM port
on a PC or notebook computer and to
a
RJ45
type serial
port
on the
managed switch
.
Figure 2: Console connectivity
A terminal program is required to make the software connect
ed
to the managed
switch. Windows' Hyper Terminal
program
may be a good choice.
The Hyper Terminal can be accessed
from the
Start
menu.
1.
Click
Start
>
Programs
>
Accessories
>
Hyper
Terminal
.
2.
When the following screen appears,
en
sure that the COM
port is
configured as
shown
below. Click
OK
when finished
with configuration.
© 2018 United Technologies Corporation.
P/N 1073387-EN
• REV
A
• ISS
06FEB18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
All rights reserved.
