Interlogix ATS1500A-IP-LP, Инструкция по установке и программированию

Страница: 289 / 376

Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 283
Common options
9.4.1.n.1 Name
1 Name
>PC conn 1 <
The connection name can consist of up to 16 characters.
9.4.1.n.2 Transm path
2>Transm path
PSTN
The Transmission path option defines which communication path is used to
establish the selected PC connection.
Note:
The next options in this menu differ for specific transmission paths. The
text in square brackets identifies the transmission path that the option is
applicable to.
9.4.1.n.4 Phone number
4 Phone number
> <
The Phone number menu defines the Up/Download telephone number 1. The
phone number can contain up to 20 digits. The following special characters are
available:
• P: Pause (3 s).
• T: Waiting for dial tone.
Note:
To enter a character, press the corresponding key twice.
9.4.1.n.5 Retry limit
5 Retry limit
> <
The Retry limit option defines a maximum number of connection attempts. The
allowed range is between 0 and 250. The retry counter is reset after each
successful connection or any incoming call.
9.4.1.n.6 Delete PC conn
To remove a PC connection, select a PC connection using the cursor, or by
entering the PC connection number, and go to the Delete PC conn menu.
The display shows:
6 Delete PC conn
>Cancel<
Choose Ok and press Enter. This removes the PC connection.
Repeat the command to delete other PC connections, or press Clear to exit and
return to the higher menu level.