Interlogix ATS1500A-IP-LP, Инструкция по установке и программированию

Страница: 202 / 376

Chapter 5: Menu reference
196 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
5 Door menu
1>Doors
2 Door groups
Use the Door menu to add, edit, or delete doors, door groups, and regions of the
Advisor Advanced system.
5.1 Doors
0>Add door
1 Door 1
Use the Door menu to add, edit, or delete doors.
The menu allows you to configure doors of both types, standard and intelligent.
Note: Particular options in this menu are specific for different door types. For
specific options, see:
• “Standard door specific options” on page 204
• “Intelligent door specific options” on page 204
Common door options
5.1.0 Add door
0>Door
1 Panel
Access the Add door menu option to add a door.
Choose one of the following locations:
• 0: Door. Add a door providing the system address of this door. If the address
is valid, the panel displays the physical door location to confirm.
Exp 3.2
>OK<
Select OK to confirm, or Cancel to exit, and then press Enter.
• 1: Panel. Add a standard door providing its number on the control panel.
• 2: DC/LC Exp. Add an intelligent door selecting the door controller, and
entering a number of the door on this door controller.
If the door is created successfully, the following message appears:
INFO
Door added