Size of Mattress (for UPPER Bunk, Twin)
SAFETY WARNING !
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any of our (Westwood Design)
dealers.
Replacement Parts
Keep all instruction sheets for future reference to assemble bed for moving and/or different set up.
ASSEMBLY INSTRUCTIONS
Page 1 of 7
DESCRIPTION: SAN MATEO BUNK BED SERIES
MADE IN MALAYSIA
1. Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2. Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on the upper bunk.
6. Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
12. The use of water or sleep flotation mattresses is prohibited.
13.
STRANGULATION HAZARD
- Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
14. Keep these instructions for future reference.
This bed is designed to use a twin mattress 37.5” to 38.5” wide x 74” to 75” long with the total thickness
not exceeding 8” for upper bunk. Do not use mattress without the proper slat system and proper
attachments described in the instructions. NOTE: there must be at least 5 inches from the top
surface of the mattress to top edge of guardrail.
