Interactive Technologies SceneStation, Руководство пользователя, Страница: 75 / 96

SceneStation Installation and Programming Guide Programming Examples | 69
Example 2: Assign a Preset to a Button
This example demonstrates how to program a button to activate a preset.
The following procedure will program Button 1 on the station to activate Preset 1 with the “normal”
function mode of the button.
Action Using SceneStation Studio Using the Programmer’s Remote
Select the Button to be programmed. In
this example, we’ll use Button 1.
Switch to the Buttons tab. Then, click on
Button 1 in the list.
Press EDIT , and then press the physical
button you want to program. The button
will quickly flash White.
Enter the preset number of the Preset you
want this button to activate (Preset 1 in
this example).
Choose “Preset 1” from the Preset
pop-up menu.
Enter the two-digit preset number, “ 01 ”.
Change the Button Function to “Normal”. Choose “Normal” from the Function
pop-up menu.
Press EDIT followed by the physical
button again. Next, press OPTION + 1 to
set the Function to “Normal”.
Store the changes. Click on the Sync button to send the
changes to the station, or use the File >
Save menu to save the changes to a file.
N/A
After this procedure is complete, a press of Button 1 on the station will activate Preset 1. The
“Normal” button function simply makes the button activate the preset.