manualshive.com logo in svg

Interactive Technologies SceneStation, Руководство пользователя, Страница: 71 / 96

Поделиться
Скачать
Interactive Technologies SceneStation Скачать руководство пользователя страница 71

SceneStation Installation and Programming Guide

Using the Programmer's Remote

  |  65

962: Enter Self-Test Mode

When this option is selected, the station enters its “Self Test Mode”.
See the Self Test Mode appendix for details.

981: Recall Built-In Show 1

When this option is chosen, the 

station’s memory is erased

 and a built-in show is loaded into 

memory.  “Show 1” is a test show that has each preset programmed with a single DMX channel 

set to 100%.  Preset 1 has Channel 1 at 100%.  Preset 2 has Channel 2 at 100%, etc.
This operation cannot be undone.

982: Recall Built-In Show 2

When this option is chosen, the 

station’s memory is erased

 and a built-in show is loaded into 

memory.  “Show 2” is a demonstration show that is set up for running RGB LED fixtures.  Each 

button on the station has a different behavior.
This operation cannot be undone.

989: Erase Memory

When this option is chosen, the 

station’s memory is erased

 and the station is returned to its 

“Factory Default” state.
This operation cannot be undone.

Содержание SceneStation

































































































Отзывы:

Нет отзывов