Interactive Technologies CueServer 2 Скачать руководство пользователя страница 394

Страница: 394 / 431

Release v1.4.1 [February 24, 2016]

Version 1.4.1b (2/24/2016)

•

Windows Installer

◦

Bug

Addressed a problem with the Windows installer that corrupted the application in a way

that would cause it to not be able to properly create new offline show files [Windows Only].

Version 1.4.1 (2/9/2016)

•

CueServer Studio 2

◦

Feature

Editor Windows now darken and display a “CueServer Offline” message when the

device becomes unreachable.

◦

Bug

Addressed a problem that would cause cue display problems and a crash in the stream

capture window on host computers that are localized to use a comma as the decimal value
separator.

◦

Bug

Addressed a problem that could cause some show files to not appear in the Navigator

window when multiple CueServers’ show listings were being displayed at the same time.

◦

Bug

Addressed a problem that could cause the “Input Status” indicator in the

Settings > DMX >

Universes

panel to show an improper status.

◦

Bug

Addressed a problem introduced in v1.4.0 that caused a warning icon to appear for the

Settings > DMX

navigation item for offline shows.

◦

Bug

Addressed a problem that caused Blue LED Indicators on the CueServer device to appear

Magenta in CueServer Studio.

◦

Bug

Addressed a problem that caused the Indicators in the

Status > Front Panel

to not be

labeled properly.

•

Firmware

◦

Feature

Temporary internal files are no longer stored in non-volitale memory to reduce wear on

flash memory.

◦

Feature

Changed the default subnet mask after factory reset to 255.0.0.0.

◦

Bug

Fixed a problem that caused the IP Address to show “No Address” when the Ethernet

cable was unplugged, instead of properly showing the IP Address.

◦

Special Note

Devices running firmware version 1.4.1 (or higher) can not be downgraded to 1.4.0

(or lower) without assistance from Technical Support. Downgrading firmware is not typically
necessary. Should a situation arise that requires a firmware downgrade, please contact
Technical Support first.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 392 of 429

Содержание CueServer 2















































































































































































































































































































































































































































Результаты поиска

Содержание CueServer 2

Отзывы:

Бренды по названию

Популярные бренды

Interactive Technologies CueServer 2, Руководство пользователя

Результаты поиска

Содержание CueServer 2

Отзывы:

Бренды по названию

Популярные бренды