Interactive Technologies CueServer 2, Руководство пользователя

Страница: 317 / 431

Playback Values [p*]
This request returns the current channel values of a given playback.
URL:
/get.cgi?req=p1
– Return Playback 1 Values
…
/get.cgi?req=p32
– Return Playback 32 Values
/get.cgi?req=po
– Return Playback Output Values
Response:
This request will return twice the number of configured channels in bytes. For example, if 1,024 channels
are configured, this request will return 2,048 bytes.
The first half of the returned bytes (equal to the number of configured channels) will be the individual
channel values from zero (
0x00
) to 100% (
0xFF
).
The second half of the returned bytes (also equal to the number of configured channels) will be channel
flags for each channel. Each channel flag byte is interpreted as a set of eight flag bits. The following table
defines the meaning of each bit:
Bit Description
0x01
The channel is active (i.e. not released)
0x02 –
0x04
–
0x08 The channel is disabled (its value does not propagate beyond playback)
0x10
–
0x20 The channel is parked (its value cannot be changed)
0x40
–
0x80
The channel defaults to a full value when (i.e. in Scale Mode)
Errors:
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 315 of 429