Interactive Technologies CueServer 2, Руководство пользователя

Страница: 206 / 431

Link
Syntax
Command Description Return Value
Link <cue number> Sets the active playback fader’s linked cue number The linked cue
Link Clear
Clears the active playback fader’s linked cue None
Link ? Returns the current linked cue of the active playback fader The current linked cue
•
<cue number>
◦ Any whole number from
0
to
99999
◦ May optionally contain decimal numbers from
.00
to
.99
Abbreviation
L
Description
Setting The Linked Cue
Use the Link command to set the linked cue for the active playback fader. Whenever a Go occurs, this link
is used to override the normal sequential execution of cues. If no link is set, cues execute in numerical
order. If the link is set to a cue, then this cue will become the next cue after the
Go .
Clearing The Linked Cue
Use the Link Clear command to clear any linked cue in the active playback fader. Without a linked cue,
future Go commands will execute cues in numerical order.
Determining The Current Linked Cue
Use the Link command with the question mark (?) to return the current linked cue. A cue number such as
1
or
100.5
will be returned. If no cue is linked,
-1
is returned.
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 204 of 429