interactive scape Scape Tangible 43, Руководство по эксплуатации

Страница: 6 / 26

1. General
—
Scape®
Tangible Technical specifications are
st43-004 to change without notice.
Operating manual Version 1.6 – Status: 12/2019
Page 6 of 26 poc: SFi
1.2. Scope of delivery
The following accessories are included with your
Scape® Tangible
:
·
Power cord for connection to the mains
· Network cable for connection to a local network
· USB cable for direct connection to a PC
· Infrared remote control (receiver on the back of the device)
· Screw cover
· Screen cleaning kit
· Operating instructions (possibly by email)
1.3. Cleaning instructions
The touch sensor of the
Scape® Tangible does not usually need to be serviced. Nevertheless, it is recommended to
clean the glass surface of the screen regularly.
·
Disconnect the device from the mains before cleaning.
· Typically, a solution of isopropyl alcohol and water (50:50 blend ratio) or the included screen cleaning kit are best for
cleaning the touch sensor.
· Apply the solution to a soft, lint-free cloth. Avoid using rough cloths.
· Use the cloth to clean the glass surface. Apply the liquid only to the cloth and never directly to the device. This will
prevent liquid from entering the inside of the device or causing marks on the frame.
1.4. Transportation instructions
The safest way to transport your device is in a
Scape® Tangible flight case (sold separately).
·
Transport the device upright.
· Do not transport the device upside down.
· Secure the device against slipping and tilting.