interactive scape Scape Tangible 43, Руководство по эксплуатации

Страница: 4 / 26

1. General
—
Scape®
Tangible Technical specifications are
st43-004 to change without notice.
Operating manual Version 1.6 – Status: 12/2019
Page 4 of 26 poc: SFi
1. General
This manual describes the safe installation, configuration and correct operation of the
Scape® Tangible .
If necessary, pay attention to the supplementary documents, such as the installation instructions.
1.1. Safety instructions
Before using and operating your Scape® Tangible , observe the following safety instructions to prevent yourself, your
environment and the Scape® Tangible from being damaged.
Fire and electric shock
Overloaded sockets, extension cords and power strips can cause fire and electric shock.
·
Avoid using power strips and extension cords if possible.
· Do not chain multiple extension cords or power strips together.
Overheating
Heat build-up can overheat the screen. This can damage the device.
·
Ensure there is sufficient air circulation around the Scape® Tangible .
· Make sure all the ventilation holes on around the screen are uncovered.
Excess voltage from lightning strikes
In the event of a thunderstorm there is a risk of excess voltage damage from lightning strikes electrical appliances that
are plugged in.
·
Do not install the Scape® Tangible during a thunderstorm.
· Disconnect the devices from the mains during thunderstorms.
Moisture, liquid and steam
Moisture, liquids and
steam inside the Scape® Tangible can cause electric shocks or short circuits.
· Only use the Scape® Tangible indoors.
· Do not allow liquids to get inside the Scape® Tangible .
· Protect your Scape® Tangible from steam and moisture.