interactive scape Scape Tangible 43, Руководство по эксплуатации

Страница: 14 / 26

5. Switching on
—
Scape®
Tangible Technical specifications are
st43-004 to change without notice.
Operating manual Version 1.6 – Status: 12/2019
Page 14 of 26 poc: SFi
5. Switching on
Switch on your device at the main switch (see chapter
2.2 - Connections & controls - point 16).
Turn on the display first and then your PC.
Make sure that there are no objects on the display when the
device is switched on.
Do not touch the touch screen during device startup, otherwise
there will be errors in the touch and object detection.
The device will take about 1.5 hours to power up before it reaches its final operating temperature. During this time, the
touch sensor of the device constantly adapts to its environment. This has a direct effect on long-term object
recognition.
If your application requires the Capore® objects to remain on the
screen for a long time, do not use object detection until the
device has reached its operating temperature.