Inter-m PT-9107S, Руководство по эксплуатации

Страница: 7 / 15

5
PT-9107S
STEREO TUNER
Rear Panel Controls
Rear Panel Controls
1. AC INLET
This terminal is connected AC input cord.
2. DC INPUT TERMINALS
This terminal is for connecting DC power supply or battery. Connect red colored terminal to positive lead
of battery and black colored one negative lead of battery.
3. FIXED MONO OUTPUT JACK
This jack is for connecting to the input jack of preamplifier or mixer. The level of this output is not adjust-
ed by volume (2 of front panel) control on the front panel.
4. VARIABLE MONO OUTPUT JACK
This jack is for connecting to the input jack of preamplifier or mixer. The level of this output is adjusted
by volume (2 of front panel) control on the front panel.
5. RESET
When the power switch ON, this unit might error. When this unit error, at first press power switch to
OFF, and press this switch for 2~3 second.
6. VARIABLE STEREO OUTPUT
This jack is for connecting to the input jack of preamplifier or mixer. The level of this output is adjusted
by volume (2 of front panel) control on the front panel.
7. ANTENNA TERMINAL
- FM TERMINAL: You can connect 75 ohms cable.
- AM TERMINAL: Connect the AM loop antenna.
8. FUSE COVER
This fuse holder contain AC fuse, replace only with same type fuse when it is blown out. If it continuously
low, stop replacing fuse and refer servicing to qualified personnel.
9
!"# !"#
$
S
N
www.inter-m.com
% %
& !
' %
CAUTION;
AVIS;
&
( ! (
CAUTION;
& )
'
!! (
! !
2 1 3 4 7
5 8 6