Intenso PHOTOAGENT, Руководство по эксплуатации, Страница: 54 / 233

EN - 21
FAQs
Why is the actual capacity of a memory card less than specified on the packaging?
The storage capacity of a flash storage medium is specified according to capacity specifications for hard drives and is subje ct to
the SI regulations (International System of Units). This system does not use the binary sys tem, which converts 1024 MB into one
1 GB. The SI standard uses the powers of 1000, where 1000 Megabyte make 1 Gigabyte. Due to this different way of calculation,
capacity specification might be different.
Why does the DF not display some pictures of my memory card?
Some not so widespread storage mediums are not compatible with the DF. Please use a compatible card. Please bear in mind that
this photo frame can only play photos with the file format “JPEG”.
A memory card is inserted but the DF cannot read this card. What can I do?
At first please check if this card is actually compatible with Intenso's DIGITAL PHOTOFRAME.
Then, please check if the card is properly inserted into the card slot. Please bear in mind that only the file format “JPEG” is
supported.
Please note:
Some digital cameras do not save pictures by use of the standard format JPEG. In such a case please refer to the
operating manual of your camera.