IntelliQuip TOUGHPOWER TP-1000, Руководство пользователя

Страница: 19 / 35

With
​ ​
the
​ ​
Battery
​ ​
fully
​ ​
charged
​ ​
and
​ ​
synchronized
​ ​
the
​ ​
ToughPower
​ ​
will
​ ​
be
​ ​
able
​ ​
to
​ ​
keep
​ ​
track
​ ​
of
​ ​
the
​ ​
charge
​ ​
in
and
​ ​
out
​ ​
of
​ ​
the
​ ​
unit
​ ​
and
​ ​
estimate
​ ​
the
​ ​
remaining
​ ​
time
​ ​
to
​ ​
Full
​ ​
or
​ ​
Empty.
Under some circumstances the
​
FULL message may disappear because the Battery Charger will resume
charging again if the Battery Charge Level drops. The user can identify that the charge has been completed
because the Battery Charge Level will automatically change from showing
​
Volts to
​
Percentage as well as
showing
​ ​
the
​ ​
time
​ ​
remaining
​ ​
icon.
Note: In the event of LOW VOLTAGE (battery protection), the ToughPower will automatically shut-off and
the
​ ​
Battery
​ ​
Charging
​ ​
State
​ ​
will
​ ​
be
​ ​
reset.
7.10
​ ​​ ​
Charging
​ ​
Protections
The built-in integrated multi-stage charger is equipped with several
protections that will ensure the battery is always protected. The
LCD Screen will indicate this condition with a
​
Warning icon to the
left of the Input Source icon as shown. The
​
FAULT led will also
pulse.
​ ​​ ​
To
​ ​
find
​ ​
out
​ ​
more
​ ​
information
​ ​
simply
​ ​
touch
​ ​
the
​ ​
Warning
​ ​
icon.
Fault:
​ ​
BattTemp
If the battery temperature falls below 0°C or rises above 50°C
charging will be immediately disabled to prevent any damage to the
battery. Charging will automatically resume after the battery
temperature gets above 5°C or below 45°C. During this condition
the
​ ​​
FAULT
​ ​
led
​​ ​
will
​ ​
pulse
​ ​
red
​ ​
twice
​ ​
every
​ ​
3
​ ​
seconds.
Fault:
​ ​
BattSense
If the battery sensor harness gets damaged, the multi-stage charger
will be immediately disabled to prevent damage to the battery.
Please contact IntelliQuip support for assistance
​
. Under this
condition
​ ​
the
​ ​
FAULT
​ ​
led
​ ​
will
​ ​
pulse
​ ​
red
​ ​
once
​ ​
every
​ ​
3
​ ​
seconds.
Page
​ ​
19