Power over Ethernet (PoE+) Splitter
IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage
Part No.:
560443
EAN-13:
0766623560443
| UPC:
766623560443
Deliver Power over Ethernet to remote devices
The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data
and electrical power to non-PoE Ethernet-enabled products using the Cat5
Ethernet cable. Using the PoE Splitter, you can take advantage of Power over
Ethernet and place Ethernet-enabled products, such as Network Cameras and
Wireless Access Points*, where power outlets are not readily available.
Simplify Installation for an Ethernet-based Device
Having to manage only an Ethernet cable simplifies the physical installation of
the device. Without having to worry about the availability of a power source,
you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m
(328 feet)** from a power source. The PoE Splitter is simple to install and
requires no tools or software.
802.3af Compliant Power over Ethernet
The PoE Splitter can be used to complement any PoE injector unit or midspan
switch to provide small to medium-sized businesses a complete end-to-end PoE
solution. This unit supports 802.3af and 802.3at, ensuring compatibility with
other 802.3af/t PoE-compliant injector units or PSE switches.
Adjustable Power Output
During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5
For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.
