Intellinet 207577, Руководство пользователя

Страница: 3 / 27

3
H.264 HDMI Over IP Extender
Operating Instructions
Introduction
This HDMI over IP Extender solution uses advanced H.264 compression to occupy lower bandwidth for
smoother transmission over the LAN. It supports transmissions up to 120 m (390 ft.) over single Cat5e/6
cable in point-to-point as well as point-to-many and many-to-many network wiring schemes. This HDMI
over IP solution can be used in a wide variety of locations and applications such as meeting rooms,
classrooms, metro stations, airports, homes, in mall advertisement and much more.
Features
•
Uses H.264 compression encoding; supports resolution up to 1080p@60hz
•
Supports signal transmission up to 120 m (390 ft.) over single Cat5e/6 cable; offers HDMI loop-out
on the transmitter
•
IR Remote to choose the source
•
LED display to show the Group ID
•
Complies with TCP/IP protocol
•
Streaming bit rate up to 15 Mbps
•
Supports LPCM audio format
•
Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)
•
Wide-band IR passthrough to control the source (38 kHz to 56 kHz)
•
Bypass two-way UART/RS232 (up to 115200); use remote controller to select 8 group baud rate
•
Supports one-to-one, one-to-many, many-to-one, many-to-many modes with large cascade
•
Dual power input: 802.3af-compliant PoE & 5 VDC (No need power supply when connecting with
POE Switch)
•
HDCP compliant
•
Supports PC tool control
•
Power supply: 5 VDC / 1 A
•
Operating instructions