Intellijel Steppy 3U Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 7

/

Steppy 3U Manual

Quick Start: Create a Track

This tutorial is designed to get you up and running with Steppy as quickly as possible. Detailed
descriptions of all functions, features and methodologies appear later in the manual.

Load an Empty Preset

First thing’s first. Just so we’re all on the same page, it’s probably a good idea to load an empty
preset into Steppy’s active memory. To do so:

1.

Press the red EDIT button at the bottom right to enter Edit mode.

The red Edit Mode LED lights, and any lit multifunction buttons glow red.

Edit functions are labelled to the right of the right column of buttons.

2.

Press the LOAD button (bottom-right button).

The LOAD button will glow red, and the left column of buttons will be used to select
which patch you want to load (and subsequently clear).

If   a   left-column   button   has   a   solid   red   light,   it   means   a   preset   is   stored   in   that   ‘slot.’   The
flashing   red   button   indicates   the   currently   loaded   preset.   If   a   button   isn’t   lit,   then   the   ‘slot’
has   no   preset   saved   to   it.

In   this   next   operation,   you   are   going   to   first   load   a   preset   into   Steppy’s   active   memory.
You   will   eventually   be   clearing   (erasing)   this   preset,   so   make   sure   to   select   one   that’s
expendable.

3.

Press whichever of the 8 left-column buttons corresponds to the preset number you wish
to load. In this example, we’ll assume you press the top-left button.

The buttons will all flash briefly to confirm that you’ve loaded a preset.

4.

Press and hold the LOAD button (bottom-right) for 1 second (long-press) to clear the
contents of the preset.

All buttons will flash, and the contents of the loaded preset will be deleted.

5.

Press the red EDIT button to exit Edit Mode (turning off its red indicator LED) and return
to Play Mode.

Page 6

«
...
5
6
7
8
9
...
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов