Connecting Stereo Mix 1U to the Audio Jacks on your Palette Case
If you have an Intellijel Palette case, you can connect the Stereo Mixer 1U directly to a pair of ¼”
audio jacks on the top of the Palette (there is one pair of ¼” audio jacks on the Palette 62, and two
pairs on the Palette 104). You can choose whether you want the ¼” jacks to send audio out of the
Stereo Mixer 1U, or into it.
● To send unbalanced, line-level mixed audio directly
out
of the Stereo Mixer 1U to a pair of
¼” audio jacks on the Palette, connect the 3-wire Link cable (provided with your Stereo Mixer
module) between the Stereo Mixer’s
CHAIN-OUT
connector and a 3-pin Link connector on your
Palette. There is only a single pair of ¼” jacks on the Palette 62, so there is only one 3-pin Link
connector. The Palette 104 has two pairs of ¼” jacks, so there are two 3-pin Link connectors —
you can connect the Stereo Mixer 1U to either of the Palette 104’s two 3-pin Link connectors,
depending on which pair of ¼” jacks you wish to use.
● To send unbalanced, live-level audio directly
into
the Stereo Mixer 1U from a pair of ¼” audio
jacks on the Palette, connect the 3-wire link cable (provided with your Stereo Mixer module)
between the Stereo Mixer’s
CHAIN-IN
connector and a 3-pin Link connector on your Palette.
There is only a single pair of ¼” jacks on the Palette 62, so there is only one 3-pin Link
connector. The Palette 104 has two pairs of ¼” jacks, so there are two 3-pin Link connectors —
you can connect the Stereo Mixer 1U to either of the Palette 104’s two 3-pin Link connectors,
depending on which pair of ¼” jacks you wish to use.
Stereo Mixer 1U Manual
11
