Learn the CC Jack Assignment (Synth 1)
, you can also assign a function to the MIDI 1U’s
CC
[F]
jack using the
LEARN
button. Specifically:
1.
If the
LEARN
[1]
button is not lit, press it once.
The
LEARN
button lights solid
blue
, indicating the MIDI 1U is in LEARN CC+CH mode, and is
awaiting a MIDI message.
In the following steps you will be learning the syn 1 MIDI Channel and MIDI CC# you want
assigned to the
CC
[F]
jack, plus that jack’s CV Polarity.
2.
Press the
CLK
÷
[2]
button to toggle between
unipolar
(0-5V) or
bipolar
(±5V) operation for the
CC
[F]
jack. Specifically.
Unipolar
:
GREEN
button: If the
CLK
÷
button is
solid green
when learning the
CC
jack
assignment, then the
CC
jack’s output voltage will be set to unipolar mode.
(i.e. CC Values of 0-127 = 0V - 5V).
Bipolar :
RED
/
GREEN
button: If the
CLK
÷
button is flashing
red
/
green
when learning
the
CC
jack assignment, then the
CC
jack’s output voltage will be bipolar (i.e.
CC Value of 64 = 0V; CC Value of 0 = -5V; CC Value of 127 = +5V).
3.
Send the MIDI 1U a MIDI message using the MIDI CC number that you want assigned to the
MIDI 1U’s
CC
[F]
jack.
MIDI 1U will automatically assign its
CC
[F]
jack to the CC# sent, while simultaneously setting
the
synth 1
MIDI channel to match. It will assign the desired polarity to that jack, and extinguish
the
LEARN
button.
For example, if you turn an Expression (CC 11) knob on a MIDI controller assigned to Channel 2,
then MIDI 1U
synth 1
will automatically assign itself to respond to CH 2, and it will configure its
CC
out jack to transmit a control voltage based on Expression (CC 11) data from your MIDI source.
Additionally, MIDI 1U will automatically save all learned settings after 2 seconds of MIDI activity
(
CLK
÷
button flashes
green
), ensuring it returns to exactly the same state after a power cycle.
MIDI 1U System Manual
19
