Intellijel Metropolix Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 138

Intellijel Metropolix Скачать руководство пользователя страница 21

ENCODER

Use   the   encoder   to   navigate   around   the   screen   —   selecting   options   and   setting   values.   The
encoder   can   be   pushed   as   well   as   turned.   In   general,   turning   an   encoder   changes   the   parameter’s
value,   while   pressing   it   may   select   a   different   parameter;   toggle   between   two   or   three   parameter
values;   or   apply   a   selection.   The   exact   operation   of   the   encoder   will   be   described   for   each   screen,
later   in   the   manual.

Depending on the screen displayed, various “helper” icons appear beneath a
parameter’s name to help guide your use of the encoder. Specifically:

TURN   the   encoder   to   instantly   change   the   parameter   value.   In
most   cases,   this   icon   appears   below   the   active   (highlighted)
parameter   name,   indicating   that   turning   the   encoder   changes   the
parameter   immediately.

TURN   the   encoder   to   queue   a   parameter   change   that   must   then
be   confirmed.   There   are   some   situations   in   which   it’s   undesirable
for   the   value   to   change   every   time   you   turn   the   encoder.   For
example,   you   wouldn’t   want   the   AUX   CV   input   to   change   destination   as   you   scrolled
through   the   choices   —   rather,   you   would   want   to   find   your   choice   and   then   confirm   your
selection.   Parameters   with   this   requirement   display   a   “?”

PRESS the encoder to confirm your selection. This icon indicates that a new parameter
value has been selected, but that you must press the encoder in order to confirm it.

PRESS   the   encoder   to   select   the   parameter   for   editing.   In   most   cases,   this   icon   appears
within   a   non-active   (not   highlighted)   parameter,   indicating   that   you   must   press   the
encoder   in   order   to   make   the   parameter   active   for   editing.

PRESS   the   encoder   to   toggle   between   two   options.   When   this   icon   appears   beneath   a
parameter   name,   it   indicates   there   are   only   two   options   for   the   parameter,   which   you   can
toggle   between   by   pressing   the   encoder.

PRESS   the   encoder   to   toggle   between   three   options.   When   this   icon   appears   beneath   a
parameter   name,   it   indicates   there   are   only   three   options   for   the   parameter,   which   you
can   cycle   through   by   repeatedly   pressing   the   encoder.

Indicates the value changes only if the

ALT

button is held when turning the encoder

Indicates the parameter is assigned to one of the

CTRL

knobs (either 1” or a “2”), and

can therefore not be changed by turning the encoder.

Metropolix Manual

20

«
...
19
20
21
22
23
...
»

Содержание Metropolix











































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды