1810 NDSU Research Circle N
Fargo, ND 58102
www.intelligentag.com
Page 4 of 8
2.
Manually turn the lead screw of the motor in order to unscrew the black nut holding clip.
If the motor is seized and will not turn by hand, use a piers to turn the lead screw.
3.
Using a 5.5 mm socket, ratchet and extension, remove the four 5.5 mm screws, rubber
washer, and the two stainless steel plates from the face of the motor. Then, remove the
motor from the motor mount.
If you are submitting a warranty claim, keep the motor in case you are asked to submit it with your
claim. Improper maintenance of the system may void motor warranty.
