INTELLICYT iQue SCREENER, Руководство по оборудованию

Страница: 76 / 110

70 iQue
®
Hardware Manual: Part Number 10554 Rev C., iQue Maintenance: Managing Plate Models
Plate Model Selection is Part of Protocol
Each plate on each experiment has a set of Protocol settings that control how the plate is run. On the Sample
section, there is a field for Plate Model. This is where the plate model is selected:
By default, the system comes with only two plate models listed: the Generic 96 Well Plate and Generic 384 Well
Plate models. Additional plate models may be added to this list for each format.
Note that in a multi-instrument installation, each plate model is only set up and callibrated once. Plate models are
global and are shared among multiple instuments.
The next sections detail adding, editing, calibrating and managing a library of plate models.
Adding a New Plate Model
1. Click Device > Manage Plate Models .