manualshive.com logo in svg

Intellian GX100NX, Инструкция по установке и эксплуатации

Поделиться
Скачать
Intellian GX100NX Скачать руководство пользователя страница 47

47

Operating Install Wizard

Operating Install Wizard

Turning On System

Make sure the antenna has a clear view of the sky. Press the Power button on the front of the Below Deck 
Termial (BDT) then a wait few minutes for system startup. Once the antenna finds the satellite, the "POWER" 
status lights will be lit Green.

Accessing AptusNX

The network is automatically configured by DHCP without the need for additional PC IP configuration.
1.  Connect an Ethernet cable from the Management LAN port on the front of the BDT to the LAN port of PC.
2.  The network connection is established automatically. 
3.  Use the following IP address to access Intellian AptusNX page.

 

•

IP Address: 192.168.2.1 (Default)

4.  Log into the AptusNX by typing in User Name and Password information. If this system has not been 

changed from the factory default:

 

•

User Name: intellian

 

•

Password: 12345678

Management LAN Port

BDT - Front Panel

Figure: Front Panel Management LAN Port Connection

PC

(Not supplied)

Содержание GX100NX






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды