DIGI-BSR-4K Installation Guide
The Intelix DIGI-BSR-4K extends HDMI over a single solid core shielded Category 5e or
greater cable using the Valens VS100RX HDBaseT chip and scales the source content up
or down to the native resolution of the connected display. The DIGI-BSR-4K supports
1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel
audio and HDCP 1.4. Built-in surge protection and diagnostic LEDs ensure hassle-free
and robust installations. Additional connections include bidirectional IR, bidirectional
RS232, Ethernet pass-through with a 2-port network switch, and analog and digital
audio de-embedding.
The DIGI-BSR-4K requires local power, but it can provide power to a compatible
HDBaseT transmitter. The power supply is included with the extender. The bidirectional
wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the
DIGI-BSR-4K compatible with most control systems. The IR emitter (DIGIB-EMT)
and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the
DIGI-BSR-4K allows a second device to share the 100BaseT Ethernet pass-through
connection without adding additional hardware to the installation.
The DIGI-BSR-4K is compatible with all Intelix HDBaseT product offerings and any
product that meets the HDBaseT specifications.
Scaler Sta
tus
HDCP Link
Firmware
L R
12V DC
LAN (PoE)
Ethernet
HDBT In
IR In
IR Out
HDMI Out
S/PDIF Out Audio Out
RS232
TX RX