AS-2H-WP Installation Guide
16
Hardware Reset
A hardware reset will reset the AS-2H-WP to the factory default setting. This procedure may be necessary if the
device RS232 settings have been changed.
1.
Short the HD 1 and HD 2 contact closures to Ground for 10 seconds.
2.
Without removing the shorted HD 1 and HD 2 contact closures, short the Auto contact closure to Ground for
3 seconds. The input LEDs will flash to indicate the reset was performed correctly.
10 seconds
3 seconds
GND
Auto
HD 2
HD 1
GND
Auto
HD 2
HD 1
Содержание AS-2H-WP
Страница 2: ......
