Intelix AS-1H1DP-WP, Инструкция по установке и эксплуатации

Страница: 16 / 24

AS-1H1DP-WP Installation Guide
16
Hardware Reset
A hardware reset will reset the AS-1H1DP-WP to the factory default setting. This procedure may be necessary if the
device RS232 settings have been changed.
1. Short the HDMI and DP contact closures to Ground for 10 seconds.
2. Without removing the shorted HDMI and DP contact closures, short the Auto contact closure to Ground for
3 seconds. The input LEDs will flash to indicate the reset was performed correctly.
10 seconds 3 seconds
GND
Auto
DP
HDMI
GND
Auto
DP
HDMI