5 Using the Control Software
5.6 Verifying an NC Program
70
Specifies the coordinates from which the tool must start motion.
5.6.4.
Using the Verify Window Controls
The buttons on the toolbar inside the Verify window provide quick access to the display settings.
Info Table: Verify Window Controls
Displays the workpiece in solid view.
Displays the workpiece in wireframe view.
Speeds up/slows down the verification process.
Zooms in/out.
Repositions the view.
Opens the Verify Settings window.
Replays the verification process.
Stops the verification process.
Centers the view.
Resets the workpiece in the Verification window.
