Intelbras IVP 3000 CF, Руководство пользователя

Страница: 5 / 8

5
1. Technical specifications
Coverage Wide Angle 115
o
Reach 12 m
Power supply 9 Vdc to 18 Vdc
Consumption 5 mA at 12 Vdc
Operating temperature - 10
o
C to 50
o
C
Relay activation time 3 segundos
2. Features
» Microprocessed digital detection technology
» 2 levels of sensitivity
» No articulator required for wall installation
» Passive infrared with double element
» Normally closed contact
» Motion detection activation
» Low consumption (5 mA only)
3. Installation
Open the front cover of the sensor (pressing the sides), make a hole in the back of the box for cable routing.
Connect the power to terminal J1 (+12 V). Connect the zone wires to the terminal J2 (Alarm).
The IVP 3000 CF does not need to be installed with an articulator, as it has a tilt angle of 15°. Its scanning angle is 115°
and the range is up to 12 meters.
Important:
the IVP 3000 CF is designed for indoor and closed areas, so do not use it for protecting outdoor areas or
open areas.
4. Product
Distance (m)
Upper view
Distance (m)
Side view
Sensor
Height (m)