Intel Xeon Phi Processor x200 страница 40 Скачать руководство пользователя | Manualshive

Страница: 40 / 114

background image



Board and System Design Guidelines

Intel

®

Xeon

®

Phi™ Processor x200 Product Family TMSDG

Order Number: 334785-002

40

5.1.3

Package/Socket Stack-up Height

The integrated stack-up height (from the top of the board to the top of the IHS) of a
processor package and LGA3647-1 socket with the processor fully seated in the socket
is 6.99 ± 0.352 mm.

1. This data is provided for information only, and should be derived from:

a. The height of the socket seating plane above the main board after reflow, given

.

b. The height of the package, from the package seating plane to the top of the

IHS, and accounting for its nominal variation and tolerances that are given in

.

2. This value is derived from a 3



Root-Sum-Square (RSS) calculation.

5.2

Printed Circuit Board (PCB) Design Considerations

5.2.1

Allowable Board Thickness

The components described in this document (namely back plate, bolster plate and
heatsink assemblies) support nominal board thicknesses in the range of 1.575 - 2.362
mm (0.062" - 0.093"). (The overall range including tolerances is given in

.) Boards outside this range may require modifications to the back plate

and heatsink retention.

5.2.2

Reference Board Layout

The processor reference board is a single node PCB 173 x 360 mm (6.8 x 14.2 inches)
intended for a 1U rack (half width). In principle two boards could be arranged side-by-
side in a 1U rack, allowing 2 nodes per 1U in a full width rack. Denser configurations
may be possible, but are not considered in this document.

5.2.3

Board Keep-outs

Each of the components described in this document may require an area beyond its
physical size to accommodate component movement. In identifying the board keep-
outs one should also consider board and system assembly processes and tools. As a
reference, recommended board keep-out drawings (PCB top and bottom side) for the
LGA3647-1 socket, bolster plate, back plate and heatsink are made available in

. PCB keep-outs include attach hole locations and sizes, component height

limits in the vicinity of the socket, and recommended areas to allow access to the
socket for processor installation.

5.2.4

Suggested Silkscreen Marking for Socket Identification

Intel is recommending that the socket name be silkscreened adjacent to the socket
such that it is visible after the bolster plate is installed.

«
...
38
39
40
41
42
...
»

Содержание Xeon Phi Processor x200



















































































































Отзывы:

Нет отзывов

Похожие инструкции для Xeon Phi Processor x200

Express EtherNetwork DFE-670TXD

Бренд: D-Link Страницы: 4

Бренд: DAD Страницы: 36

Бренд: D-Link Страницы: 2

Бренд: Delta Electronics Страницы: 1

Бренд: JETWAY Страницы: 55

Бренд: Airlink101 Страницы: 46

Бренд: Idis Страницы: 18

Бренд: TANDBERG Страницы: 2

Бренд: Xcellon Страницы: 24

PD-9501-10GCO/AC

Бренд: Microchip Technology Страницы: 41

Бренд: Intel Страницы: 51

Бренд: EVGA Страницы: 3

Бренд: Renesas Страницы: 7

Бренд: Grundfos Страницы: 40

Бренд: SilverStone Страницы: 17

Бренд: PairGain Страницы: 76

Бренд: Abov Страницы: 8

i.MX 6SoloLite Linux

Бренд: Freescale Semiconductor Страницы: 199

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды