manualshive.com logo in svg

Intel True Scale Fabric Switches 12200, Руководство по установке

Поделиться
Скачать
Intel True Scale Fabric Switches 12200 Скачать руководство пользователя страница 96

12000 Series Switches

True Scale Fabric Switches 12000 Series Hardware

Installation Guide

July 2015

96

Order Number: G91928004US

E.2.1.2

Replacement Procedures

1. Install the hat rails to the switch.
2. Rack mount the switch in the existing rails on the rack.
3. Connect Ethernet and serial cables.
4. Connect AC power.
5. Change the switch, gateway and subnet mask addresses to a new network address.
6. Cable all applicable IB ports.

E.2.2

Fan/Power Supply Replacement

FRU part number:

• 12300PS01

Note:

These fan/power supplies are to be used exclusively with the Intel

®

 12300 QDR IB 

switch and are not intended to be sold separately.

E.2.2.1

Removal Procedures

1. Push the finger tab to the right.
2. While holding the finger tab, pull the module handle to disengage the unit from the 

switch.

Figure 70.

12300 Fan/Power Module Removal

Содержание True Scale Fabric Switches 12200








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды