Intel SR1690WB - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 38 / 154

20 Intel
®
Server System SR1690WB Service Guide
Figure 10. Optional Peripherals
Hard Disk Drives
The server system ships with four hot-swap drive carriers for installing four SATA/SAS
Hard disk drives, both 3.5-inch or 2.5-inch HDDs.
For instructions on installing hard drives, see “Installing and Removing a Hot-swap Hard
Drive” on page -35 .
Slimline Optical Drive latch
You can use a slimline optical drive latch with an optional optical drive. One slimline
optical drive latch is included with your server system; you must purchase the optical
drive separately.
You can only insert or remove the slimline optical drive when the system power is turned
off. Drive in the optical drive bay is NOT hot-swappable. For installation instructions on
installing an optical drive, see “Installing or Removing a Slimline Optical Drive” on
page -38 .
To use one of the drives provided by Intel, use the following order codes:
•
SATA Slimline DVD Drive: AXXSATADVDROM
•
SATA Slimline DVD Rewriteable Drive: AXXSATADVDRWROM
Rack-Mounted Systems
Your Intel
®
Server System SR1690WB can be mounted into a rack. Intel provides three
options to mount this server into a rack. When installing the chassis into a rack, Intel
recommends you install systems from the bottom of the rack to the top. In other words,
install the first system in the rack into the bottom position of the rack, the second system
in the second position from the bottom, and so on. Instructions for installing your chassis
into a rack are included in the rail kit.
A. Front Control Panel
B. Slimline Optical Drive
C. Hard Drive Bays HDD0~3
D. HDD Status LED
E. HDD Power LED