Intel Server Board SE7501BR2 Installation and Integration Guide
Intel Server Management
Intel Server Management and the service partition on the hard drive provide real-time
monitoring and alerting for your server hardware, emergency remote management, and
remote server setup.
Intel Server Management is implemented by installing it within client-server architecture.
Intel Server Management provides an interface to the Intel
®
Server Maintenance and
Reference Training Tool CD (Intel
®
SMaRT Tool) (see “Intel SMaRT Tool” on page 26),
combining remote error detection and alerting with interactive maintenance and repair
assistance. When Intel Server Management detects a hardware error and a part needs to be
replaced, the Intel SMaRT Tool can be launched directly from Intel Server Management to
locate the correct part information and the corresponding steps required to quickly get the
server back up and running.
To get started with Intel Server Management, first install the Service Partition, then the
operating system, and finally Intel Server Management (uninstall any previous versions
first). The information here describes installation on a system running a Microsoft Windows
operating system.
Installing Intel Server Management
You can install Intel Server Management on a local server or on a remote workstation that is
used to manage a LAN/WAN.
Insert the
Intel
®
Server Management CD
into the system’s CD-ROM drive.
1.
Click
Install Server Management.
2.
Complete the Registration form and click
Submit
.
3.
Select the applicable system option.
4.
Review the Intel Software License Agreement, and click
Accept
.
5.
If installing to a local server, click
Install Now
. If this is a multiple system installation,
click
Add
to compile a list of systems and then click
Install Now
.
6.
Select Reboot Now or Reboot Later.
7.
Remove the Intel Server Management CD.
25
