Intel® Server System S9200WK Product Family Setup and Service Guide
51
If the compute module does not have DIMM retention clips installed, skip to step 6.
Figure 53. Removing the DIMM retention clips
3.
Identify and locate the faulty DIMM
4.
Use the memory removal tool as a lever and position one end between the DIMM retention clip and
the liquid cooling loop (see Letter A).
5.
Lift the DIMM retention clip from the liquid cooling loop (see Letter B).
Figure 54. Removing the DIMM in a liquid cooled system
6.
Using the memory replacement tool, open the DIMM ejection tabs at both ends of the DIMM slot (see
Letter A and Letter B). The DIMM will slightly lift up from the slot.
7.
Hold the DIMM by its edges and lift it away from the slot (see Letter C).
