Intel® Server S2600ST Product Family Configuration Guide and Spares/Accessories List
22
3.2.4
8x2.5” Hot-swap SAS/SATA/NVMe Data Cable Guide
The backside (Cable connector side) of the standard 8x2.5” combo backplane (
iPC - AUP8X25S3NVDK
) includes two 4-port 8643 Mini-SAS HD
data connectors (Ports 0 – 3 & Ports 4 – 7) for SAS/SATA support, and eight PCIe* OCuLink connectors for NVMe support (one connector for each
PCIe NVMe SFF drive). Each OCuLink connector is labeled with a Drive ID (0 – 7) which corresponds to a matching drive interface connector on
the front side (drive interface side) of the backplane.
The OCuLink cable kits: iPC -
AXXCBL450CVCR
(MB to HSBP OCuLink cable kit) and iPC -
AXXCBL625CVCX
(4P switch OCuLink cable kit),
must
be ordered separately.
Note:
on the Intel® Server Chassis
(
iPC - P4304XXMFEN2
and
iPC - P4304XXMUXX
) up to four NVMe Drives are supported.
Figure 6. SATA/SAS 0-7
