Intel S2600CW Скачать руководство пользователя

Страница: 134 / 210

Intel® Light Guided Diagnostics

Intel® Server Board S2600CW Family TPS

120

Revision 2.4

9.4.2

System Status LED

The bi-color (green/amber) System Status LED operates as follows.

Table 38. System Status LED

Color

State

Criticality

Description

Green

Solid on

Indicates that the System Status is “Healthy”. The system is not

exhibiting any errors. AC power is present and BMC has booted and

manageability functionality is up and running.

Green

~1 Hz blink Degraded

System degraded:

Redundancy loss such as power-supply or fan. Applies only if the

associated platform sub-system has redundancy capabilities.

Fan warning or failure when the number of fully operational fans

is less than minimum number needed to cool the system.

Non-critical threshold crossed – Temperature (including HSBP

temp), voltage, input power to power supply, output current for

main power rail from power supply and Processor Thermal

Control (Therm Ctrl) sensors.

Power supply predictive failure occurred while redundant power

supply configuration was present.

Unable to use all of the installed memory (more than 1 DIMM

installed).

Correctable Errors over a threshold and migrating to a spare

DIMM (memory sparing). This indicates that the user no longer

has spared DIMMs indicating a redundancy lost condition.

Corresponding DIMM LED lit.

In mirrored configuration, when memory mirroring takes place

and system loses memory redundancy.

Battery failure.

BMC executing in uBoot. (Indicated by Chassis ID blinking at

Blinking at 3Hz). System in degraded state (no manageability).

BMC uBoot is running but has not transferred control to BMC

Linux*. Server will be in this state 6-8 seconds after BMC reset

while it pulls the Linux* image into flash.

10.

BMC booting Linux*. (Indicated by Chassis ID solid ON). System

in degraded state (no manageability). Control has been passed

from BMC uBoot to BMC Linux* itself. It will be in this state for

~10-~20 seconds.

11.

BMC Watchdog has reset the BMC.

12.

Power Unit sensor offset for configuration error is asserted.

13.

HDD HSC is off-line or degraded.

Amber ~1 Hz blink Non-critical

Non-fatal alarm – system is likely to fail:

Critical threshold crossed – Voltage, temperature (including

HSBP temp), input power to power supply, output current for

main power rail from power supply and PROCHOT (Therm Ctrl)

sensors.

VRD Hot asserted.

Minimum number of fans to cool the system not present or

failed.

Содержание S2600CW



















































































































































































































Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды

Intel S2600CW, Технические характеристики продукции

Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды