manualshive.com logo in svg

Intel S1200BT, Руководство по обслуживанию, Страница: 77 / 122

Поделиться
Скачать
Intel S1200BT Скачать руководство пользователя страница 77

Intel® Server Board S1200BT Service Guide

61

Figure 37. Error Manager Screen

System Event Log Screen (Tab)

The System Event Log screen appears only for server boards (other than Compute Module 

boards) which do not have an onboard Baseboard Management Controller. These boards 

maintain the System Event Log internally by using the SMBIOS Type 15 mechanism. 

The System Event Log viewer can display as many log records as are stored in a single 

page. Each Event Record is displayed on one line. The most recent Event Record is 

displayed on the top. When there are more Event Records that can be displayed at once, 

the 

<PageUp>

 and 

<PageDown>

 keys can be used. There is also a scroll bar to allow 

users to view the logs from beginning to the end.

Note:

When the System Event Log is full, or when the user wishes to remove the current Event 

Records, the user can choose Clear System Event Log in Setup.

Figure 38. System Event Log Screen (S1200BTS)

Содержание S1200BT



























































































































Отзывы:

Нет отзывов