Intel S1200BT Скачать руководство пользователя страница 75

Страница: 75 / 122

Intel® Server Board S1200BT Service Guide

Figure 33. BEV Device Order Screen

Add EFI Boot Option

The Add EFI Boot Option screen allows the user to add an EFI boot option to the boot

order. This screen is only available when there is at least one EFI bootable device present

in the system configuration. The “Internal EFI Shell” Boot Option is permanent and

cannot be added or deleted.

To access this screen from the

Main

screen, select

Boot Options

Add EFI Boot

Option

. To move to another screen, press the

<Esc>

key to return to the

Boot Options

screen, then select the desired screen.

Figure 34. Add EFI Boot Option Screen

Delete EFI Boot Option

The Delete EFI Boot Option screen allows the user to remove an EFI boot option from the

boot order. The “Internal EFI Shell” Boot Option will not be listed, since it is permanent

and cannot be added or deleted.

To access this screen from the

Main

screen, select

Boot Options

Delete EFI Boot

Option

. To move to another screen, press the

<Esc>

key to return to the

Boot Options

screen, then select the desired screen.

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 75 / 122

Результаты поиска

Содержание S1200BT

Отзывы: