Intel S1200BT Скачать руководство пользователя страница 74

Страница: 74 / 122

Intel® Server Board S1200BT Service Guide

Figure 31. Floppy Order Screen

Network Device Order

The Network Device Order screen allows the user to control the order in which BIOS

attempts to boot from the network bootable devices installed in the system. This screen is

only available when there is at least one network bootable device available in the system

configuration.

To access this screen from the

Main

screen, select

Boot Options

Network Device

Order

. To move to another screen, press the

<Esc>

key to return to the

Boot Options

screen, then select the desired screen.

Figure 32. Network Device Order Screen

BEV Device Order

The BEV Device Order screen allows the user to control the order in which BIOS

attempts to boot from the BEV Devices installed in the system. This screen is only

available when there is at least one BEV device available in the system configuration.

This screen is the same for both Bromolow and Romley.

To access this screen from the

Main

screen, select

Boot Options

BEV Device Order

To move to another screen, press the

<Esc>

key to return to the

Boot Options

screen, then

select the desired screen.

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 74 / 122

Результаты поиска

Содержание S1200BT

Отзывы: